Powder Coating Cube

Powder Coating Cube

SKU: PCC1/PCC2 Click Here for Specifications & Optional Features
$3,999
Processing...

Powder Coating Cube

SKU: PCC1/PCC2 Click Here for Specifications & Optional Features
$3,999

Shipping Weight: 1000.00 pounds

Style:

Product Description

New! Powder Coating Cubes from Standard Tools and Equipment and the perfect open-faced booth for venturing into powder coating or for smaller jobs.

There are two configurations for the powder coating cube. PCC1 features the fan and final filter on the right side of the booth while PCC2 features it on the top of the booth.

This open-faced spray system features a well-lit booth of industrial 18-gauge galvanized steel construction, white powder-coated finish, a 3-stage filter panel, including exhaust filters and grids, powder coating pocket filters and final stage filters for non-vented exhaust. Over-sprayed powder collects on the primary filters until full, and then filters are replaced.

Powder Coating Cubes from Standard Tools and Equipment meet OSHA & NFPA spray booth regulations.

  • Walk-in Design
  • White Powder-Coated Finish
  • Strong TEKS Screw construction for easy installation
  • Filters are easy to inspect and clean
  • Powder-specific design
  • All Hardware and Installation manuals included
  • One Year Manufacturers Warranty
    INCLUDED
  • (1) Manometer
  • (1) UL listed tube axial fan and 3-phase motor with belts, pullies & sheave
  • (1) Set of 2 pocket bag filters size 20" x 20"
  • (1) Set of pre-filters
  • (1) Set of final filters
  • (1) Final Filter box
  • (1) 48" 4-tube fluorescent light fixtures w/clear tempered glass in ceiling
    OPTIONS
  • Single-Phase or Three-Phase Motor
  • Adjustable booth size

    PCC1
    Powder Coating Cube with Fan on the Right Side
    Outside Dimensions: 10’ 2” W x 7’ 1.5” H x 8’ 6” L
    Inside Dimensions: 6’ W x 7’ H x 6’ L


    PCC2
    Powder Coating Cube with Fan on Top
    Outside Dimensions: 6’ 3” W x 10’ 9” H x 8’6”L
    Inside Dimensions: 6’ W x 7’ H x 6’ L

New! Powder Coating Cubes from Standard Tools and Equipment and the perfect open-faced booth for venturing into powder coating or for smaller jobs.

There are two configurations for the powder coating cube. PCC1 features the fan and final filter on the right side of the booth while PCC2 features it on the top of the booth.

This open-faced spray system features a well-lit booth of industrial 18-gauge galvanized steel construction, white powder-coated finish, a 3-stage filter panel, including exhaust filters and grids, powder coating pocket filters and final stage filters for non-vented exhaust. Over-sprayed powder collects on the primary filters until full, and then filters are replaced.

Powder Coating Cubes from Standard Tools and Equipment meet OSHA & NFPA spray booth regulations.

  • Walk-in Design
  • White Powder-Coated Finish
  • Strong TEKS Screw construction for easy installation
  • Filters are easy to inspect and clean
  • Powder-specific design
  • All Hardware and Installation manuals included
  • One Year Manufacturers Warranty
    INCLUDED
  • (1) Manometer
  • (1) UL listed tube axial fan and 3-phase motor with belts, pullies & sheave
  • (1) Set of 2 pocket bag filters size 20" x 20"
  • (1) Set of pre-filters
  • (1) Set of final filters
  • (1) Final Filter box
  • (1) 48" 4-tube fluorescent light fixtures w/clear tempered glass in ceiling
    OPTIONS
  • Single-Phase or Three-Phase Motor
  • Adjustable booth size

    PCC1
    Powder Coating Cube with Fan on the Right Side
    Outside Dimensions: 10’ 2” W x 7’ 1.5” H x 8’ 6” L
    Inside Dimensions: 6’ W x 7’ H x 6’ L


    PCC2
    Powder Coating Cube with Fan on Top
    Outside Dimensions: 6’ 3” W x 10’ 9” H x 8’6”L
    Inside Dimensions: 6’ W x 7’ H x 6’ L

Shipping Quote

Add this item to your virtual cart to find out how much shipping will cost instantly. Select "estimate shipping" in your online cart and enter your shipping zip code to see the cost. If you would prefer to receive a shipping quote via email, fill out the form below or give us a call at 888-312-7488. See details on our blog for more info about our online cart! Blog Shipping Quote Information

You must javascript enabled to use this form.

Eagle Equipment Warranty

Eagle Equipment warrants to the original retail purchaser of an Eagle Lift, Tire Changer or Wheel Balancer that it will replace without charge, in the United states or Canada any part found under normal use, to be defective in materials or workmanship, for a period of one (1) year from date of purchase. Warranty covers parts only; purchaser is responsible for any and all labor requirements.

Eagle Equipment will cover warranty parts replacement shipping charges for the first 30 days after purchase. Purchaser is responsible for shipping costs after this time.

Exclusions

This warranty will not apply to any machine:

  1. Which has not been operated or maintained according to specifications
  2. Which has been abused, misused altered or improperly maintained
  3. Which has been improperly assembled and/or installed
  4. Requiring parts needed for normal maintenance, such as rubber pads, soap-buckets, brushes, plastic inserts, etc.

Eagle Equipment reserves the right to make improvements and/or design changes to its equipment without any obligation to previously sold, assembled or fabricated equipment.

There is no other express warranty on the Eagle Lift, Tire & Wheel Service equipment and this warranty is exclusive of and in lieu of all other warranties, expressed or implied, including all warranties of merchantability and fitness for a particular purpose.

Eagle Equipment shall not be liable for loss of use, inconvenience, lost time, commercial loss or other incidental or consequential damages

Freight/Shipping

Standard Tools and Equipment uses common carriers, FedEx Ground, UPS, and independent freight haulers for shipping. We negotiate the most competitive freight rates possible and pass these savings along to our customers. We make every effort to minimize freight charges to our customers and provide for timely delivery.

Most items in stock will ship within two business days. Standard Tools and Equipment will not be liable for any damages related to unavailability of inventory or delays in shipping.

Standard Tools and Equipment ships all products FOB our warehouses. Title for goods passes to customer when product leaves our dock.

Items advertised with "Free Freight" applies only to shipments within the 48 contiguous states (excludes Alaska, Hawaii, and Canada and Mexico).

Call Sales at 1-800-312-7488 for a specific freight quote.

Delivery and Unloading

Customer is responsible for unloading shipment from truck. Standard Tools and Equipment will assume no responsibility for any additional charges or damages that may be incurred as a result of unloading from the delivering carrier's truck.

Freight carriers have restrictions on delivering to residential addresses and may require pick-up at freight terminal. We cannot advise customers of exact time of delivery as we do not ship on our own trucks. We will give our customers an estimated time of delivery and provide them with tracking information.

All shipments must be inspected immediately upon receipt.

For your protection, any external damage must be noted on the Bill of Lading at the time of delivery in order to qualify for a claim against the freight carrier. Concealed damages must be reported to the freight company within three days of delivery. It is the customer's responsibility to file for damage claims against the freight company. Shortages/missing parts must be reported to Standard Tools and Equipment customer service within seven days of delivery.

For Paint Booths only, Customers have 30 days to report shortages/missing parts.