NESHAP Cross Flow Sanding Booth

NESHAP Cross Flow Sanding Booth

SKU: CF1000-NSB Click Here for Specifications & Optional Features
$15,270
Processing...

NESHAP Cross Flow Sanding Booth

SKU: CF1000-NSB Click Here for Specifications & Optional Features
$15,270

Product Description

Full size enclosed sanding booth with NESHAP 3-Stage Filtration, 14’W X 9’H X 26’L, based on the popular cross flow booth design. Filtered doors, double fans, filtered exhaust wall and two MERV filter boxes for recirculated air, this new model booth is an added benefit for body shops!

Since sanded particles are typically larger and heavier than paint overspray, this 3-stage NESHAP sanding booth from Standard Tools and Equipment Co. is designed with greater airflow to move the particles through all three filters.

Large Full Size Enclosed Booth: This sanding booth gives you plenty of room to prep and sand, 14’W X 9’H X 26’L, it can fit a car with ease. As an enclosed booth, it keeps all of the sanding debris inside your work area and exhumes it out through the filtration media.

No Wall Cutting. No Duct. Re-circulated Air: Designed to be a stand-alone unit, this booth does not require duct penetrations on the building.

3-Stage NESHAP Filtration: This booth’s 3-stage filtration captures high volumes of dust, with up to 99.9% filter efficiency at 5 microns. Dust is filtered out through our blanket filter media, then through bag filters and finally through the double final stage filter boxes, rated at MERV 11 The air can then be re-circulated through the booth with clean air entering through the filtered doors.

Fans: It’s important to get enough airflow in a sanding booth. This booth is equipped with two 24” Fans. (3HP / 3PH MTR / 9332 CFM).

Electrical: Available in single-phase or three-phase. Comes with a control box to control the fans and lights from one location.

Lighting: This sanding booth comes with 10 light fixtures (2’ X 4’) for florescent T8 bulbs.

Filter Maintenance: Comes with a complete set of filters and a manometer to indicate when the filters need to be replaced. When your filters are full, you can contact us to order your replacement filters.

Powder Coated Finish: This sanding booth comes in a sharp white durable powder-coated finish, inside and outside the booth.

Easy Access: Entrances to this booth include the tri-fold filtered entrance doors (10' W x 9' H ) or the personnel door with large clear tempered glass viewing window.

Compliant: Our products meet or exceed all of the applicable codes related to the equipment.

Want even better lighting? Ask us about our new LED flat panel lights that can be upgraded in this booth model!

**Price includes crating

Shipping Quote

Add this item to your virtual cart to find out how much shipping will cost instantly. Select "estimate shipping" in your online cart and enter your shipping zip code to see the cost. If you would prefer to receive a shipping quote via email, fill out the form below or give us a call at 888-312-7488. See details on our blog for more info about our online cart! Blog Shipping Quote Information

You must javascript enabled to use this form.

Eagle Equipment Warranty

Eagle Equipment warrants to the original retail purchaser of an Eagle Lift, Tire Changer or Wheel Balancer that it will replace without charge, in the United states or Canada any part found under normal use, to be defective in materials or workmanship, for a period of one (1) year from date of purchase. Warranty covers parts only; purchaser is responsible for any and all labor requirements.

Eagle Equipment will cover warranty parts replacement shipping charges for the first 30 days after purchase. Purchaser is responsible for shipping costs after this time.

Exclusions

This warranty will not apply to any machine:

  1. Which has not been operated or maintained according to specifications
  2. Which has been abused, misused altered or improperly maintained
  3. Which has been improperly assembled and/or installed
  4. Requiring parts needed for normal maintenance, such as rubber pads, soap-buckets, brushes, plastic inserts, etc.

Eagle Equipment reserves the right to make improvements and/or design changes to its equipment without any obligation to previously sold, assembled or fabricated equipment.

There is no other express warranty on the Eagle Lift, Tire & Wheel Service equipment and this warranty is exclusive of and in lieu of all other warranties, expressed or implied, including all warranties of merchantability and fitness for a particular purpose.

Eagle Equipment shall not be liable for loss of use, inconvenience, lost time, commercial loss or other incidental or consequential damages

Freight/Shipping

Eagle Equipment uses common carriers, FedEx Ground, UPS, and independent freight haulers for shipping. We negotiate the most competitive freight rates possible and pass these savings along to our customers. We make every effort to minimize freight charges to our customers and provide for timely delivery.

Most items in stock will ship within two business days. Eagle Equipment will not be liable for any damages related to unavailability of inventory or delays in shipping.

Eagle Equipment ships all products FOB our warehouses. Title for goods passes to customer when product leaves our dock.

Items advertised with "Free Freight" applies only to shipments within the 48 contiguous states (excludes Alaska, Hawaii, and Canada and Mexico).

Call Sales at 1-800-336-2776 for a specific freight quote.

Delivery and Unloading

Customer is responsible for unloading shipment from truck. Eagle Equipment will assume no responsibility for any additional charges or damages that may be incurred as a result of unloading from the delivering carrier's truck.

Freight carriers have restrictions on delivering to residential addresses and may require pick-up at freight terminal. Lifts will require a fork-lift to unload. It is advantageous in those cases to ship to a freight terminal where the terminal personnel will unload the product and load it onto the customer's trailer or truck. Lifts cannot be unloaded using a lift gate vehicle. We cannot advise customers of exact time of delivery as we do not ship on our own trucks. We will give our customers an estimated time of delivery and provide them with tracking information.

All shipments must be inspected immediately upon receipt.

For your protection, any external damage must be noted on the Bill of Lading at the time of delivery in order to qualify for a claim against the freight carrier. Concealed damages must be reported to the freight company within three days of delivery. It is the customer's responsibility to file for damage claims against the freight company. Shortages/missing parts must be reported to Eagle Equipment customer service within seven days of delivery.

For Paint Booths only, Customers have 30 days to report shortages/missing parts.